PowerBox BaseLog

PowerBox BaseLog

Brand: PowerBox™ Systems
Product Code: PB 3410
Availability:
In Stock
Price: $135.20 USD$169.00 USD
Description

PowerBox BaseLog

The PowerBox BaseLog combines high performance capacity with excellent battery monitoring facilities, as it includes the option of sending battery-relevant data directly to the transmitter's screen.

Like all PowerBox battery backers, the PowerBox BaseLog features completely redundant construction. The regulators, the switches and even the micro-controllers which are responsible for the on / off switching process, are duplicated in a consistent manner.

The essential battery type information is entered using a menu system and the integral OLED screen with the help of the SensorSwitch supplied in the set. The telemetry interface is simply connected to the receiver using a patch-lead;  the TM1000 telemetry module is only required for Spektrum equipment. The receiver sends the data directly to the transmitter's screen.  Alarms - such as battery failure - are also generated at the transmitter itself.

The high-resolution OLED screen displays the voltage and residual capacity of both batteries as well as the output voltage actually present.

The BaseLog delivers a regulated output voltage of 5.9 V or 7.4 V, making it a great choice for standard 6.0 V servos as well as HV systems. In both cases the constant output voltage ensures consistent running and extended effective life for your servos.

Power is fed to the receivers via the two patch-leads supplied in the set. Optional patch-leads are also available to suit high-current inputs, which are now fitted to a number of receiver types.

Features:

  •     Graphic OLED screen with 128 x 64 pixels
  •     Extremely user-friendly menu-based programming using the SensorSwitch
  •     Double-regulated output voltages for receivers and servos
  •     Regulated voltage with selection facility, 5.9V or 7.4V
  •     Connection facilities for Spektrum and Multiplex MSB downlink bus systems
  •     Direct transmission of battery voltage and capacity to the transmitter
  •     Separate voltage and capacity display for each battery
  •     Minimum value memory alerts the user to voltage collapses
  •     Large-area heat-sinks for high regulator performance
  •     Regulator monitoring, regulator error indicator
  •     Support for three battery types: LiPo, NiMH / NiCd, LiFePo
  •     Suppression of any servo feedback currents which may occur
  •     Various patch-leads (MPX/JR, MPX/MPX) available, allowing the use of all receiver types

Technical Data

  • Operating voltage            4.0V - 9.0V
  • Power supply      2S LiPo, 2S LiFePo, 5S NiCd/NiMH
  • Current drain Power-on state       85mA
  • Current drain Standby      10µA
  • Maximum load current    Peak 2x20A
  • Drop-out voltage              0.3V
  • Output voltage   5.9V or 7.4V regulated
  • Screen   OLED 128 x 64 pixels, graphic
  • Supported telemetry systems       Spektrum, HoTT, M-Link, Jeti EX
  • Dimensions         93 x 67 x 20 mm
  • Weight 88 g
  • Weight Sensor Switch      15 g
  • Temperature range          -30°C to +75°C

Unit measure approx. 2 1/2" x 3" x 3/4"

MPX to EC3 adapter available seperately

Baselog Instructions

LMA specification for models over 20kg

Futaba FASST receiver users ALERT

Video:  PowerBox BaseLog dual regulator system

BaseLog review by Flying Giants

BaseLog review by Keith Sievers (President of J.P.O.)

Note:  DO NOT FLY ON FRAME LOSS SCREEN.  Always fly on Dash Board Consumption Screen.

Related Products