PowerBox iGyro SRS

PowerBox iGyro SRS

Brand: PowerBox™ Systems
Product Code: PB 3510
In Stock
Price: $399.00 USD

Available Options


PowerBox iGyro SRS

The PowerBox iGyro™ SRS is a completely new type of gyro system intended for fixed-wing model aircraft. At the development stage our constant aim was to combine maximum versatility with simplicity of operation. The system incorporates a regulatory algorithm specifically developed for fixed-wing models which causes hardly any alteration in the model’s familiar flying characteristics; at the same time the aeroplane flies much more smoothly and accurately and is less sensitive to unwanted weather-induced or aerodynamic influences. The need for mixers, such as elevator to rudder or flaps, is eliminated entirely. The iGyro™ exploits the latest servo bus technology to minimise the extremely complex wiring arrangements necessitated by previous gyro systems.                          

The ability to assign any channel to the gain adjusters makes it possible to set up the desired gyro effect accurately in just one short flight. Independent adjustment of each of the five outputs is possible, enabling the modeller to set up gyro gain and direction of effect precisely. The separate GPS sensor provides a means of obtaining a constant gyro effect over the model’s full speed range effectively eliminating the problem of over-compensation leading to oscillation in high-speed flight. In version 16 and later the software includes a menu-based setup assistant which makes it possible to complete all the settings in just a few minutes.

The PowerBox iGyro SRS SENSOR ONLY is also available seperately (Standard and Futaba S-BUS II) - Please click here


  •     Extremely accurate triple-axis MEMS sensor
  •     Special regulatory algorithm designed for fixed-wing model aircraft
  •     Menu-based setup assistant
  •     Three-stage flight phase switching
  •     Three axes distributed to five servos, each adjustable independently
  •     GPS-regulated gyro gain
  •     Integral delta mixer
  •     Can be installed in any attitude
  •     Graphic OLED screen with 128 x 64 pixels
  •     Ultra-simple menu-controlled programming method using the SensorSwitch
  •     SRS technology for use with various bus systems: Futaba S-Bus, Spektrum DSM2 / DSMX, JR DMSS, HoTT, M-Link and Jeti
  •     Unrestricted channel assignment (channel mapping)
  •     Digital output can be passed on to an SRS PowerBox system
  •     16-bit processor for fast, high-resolution signal processing
  •     Settings can be stored on a PC and reloaded at any time
  •     Updateable with PowerBox Systems USB Interface connectors
  •     Robust aluminium case

Technical Data:

  • Operating voltage            4.0V - 9.0V
  • Current drain Power-on state       51mA
  • Current drain, GPS            60mA
  • Maximum load current    10A
  • Signal input         serial
  • Supported RC systems     Futaba, Spektrum, JR, Jeti, Graupner, Multiplex
  • Receiver redundancy       SRS
  • Servo sockets     5
  • Servo signal resolution    0,5µs
  • Gyro regulation Heading- and Normalmode
  • Gyro sensor type              MEMS
  • Number of sensor axes   3
  • Screen   OLED 128 x 64 pixels, graphic
  • Dimensions         52 x 35 x 14 mm
  • Weight 50g, incl. GPS Sensor
  • Temperature range          -30°C to +75°C

iGyro SRS complete - includes iGyro SRS, Sensor Switch, GPS Sensor & USB Interface

iGyro SRS Simplified - by Keith Sievers

Video - Basics of PowerBox iGyro SRS - by Reza Gholamipour

Video - How to Set Up the PowerBox iGyro SRS - by Reza Gholamipour

Setting up the SRS PowerBox with the iGyro SRS

Video - iGyro SRS set up for Futaba

iGyro SRS Instructions Part 1 - Pages 1 - 14

iGyro SRS Instructions Part 2 - Pages 15 - 28

Notes regarding the different BUS systems

LMA specification for models over 20kg

Futaba FASST receiver users ALERT

Using the iGyro or the Royal SRS to configure thrust vectoring

iGyro SRS wiring schematic

iGyro SRS wiring schematic (with no PowerBox, just receiver)

Wiring schematic for PowerBox iGyro SRS with Jeti Central Box 200

iGyro SRS + Futaba 6014 schematic

Note:  The PowerBoxes (with the exception of the BaseLog) will not work with the Spektrum Power Safe receivers. We recommend you use the AR 9000 or the JR 921.

Note:  DO NOT FLY ON FRAME LOSS SCREEN.  Always fly on Dash Board Consumption Screen.

Tags: iGyro SRS

Related Products